Base: One piece #14 ga steel with 3/4" returns to wall surface for maximum strength and rigidity.
Cover: Fabricated of #18 ga stainless steel, #4 satin finish, spot welded to form one piece unibody construction. Cover is secured to base with two tamper resistant fasteners. Special key provided to remove cover. All seams polished smooth.
Heating Element: Dynamically balanced to eliminate vibration &noise. 2300 watt nichrome coil would element on state of the art convective cooling system. Ambient temp produced at nozzle is 70 degrees F.(21 C) Unit is protected by an integral thermal safety circuit breaker.
Motor: Brushless, 1/8 hp, 3450 RPM capacitor initiated with non-lubricating bearings and thermally protected against over heating. Fan: Dynamically balanced to eliminate vibration & noise.
Nozzle: Fixed chrome plated nozzle that can be changed from fixed to 2 position in the field.
Overall Size: 12 5/16"W x 8 1/2"H x 7"D 313mm x 216mm x 178mm
Timer: Fully enclosed, non-mechanical timer, that automatically turns off when hands are moved away from path of sensor. Electric Eye: Sensor allows a hands free operation. When sensor beam path is disturbed, dryer will automatically turn on. When hands move away from beam, dryer stops.