Capacity: 34 fl ounces
Depth: 3.75"
Face Plate: Fabricated of #18 ga stainless steel with #4 satin finish, one piece construction with 1/4" returns to wall. Wall housing is fabricated of #22 ga pre-plated steel with 1/4" returns to wall for added rigidity. Soap capacity viewer is integral part of face plate.
Height: 7.25"
Lock: Pin tumbler, commercial quality type lock is keyed like all other AJW cabinets.
Mounting: Recessed
Overall Size: 7 1/4"W x 7 1/4"H x 3 3/4"D 184mm x 184mm x 95mm
Preventative Maintenance: Each dispenser should be cleaned out aprx every 30 days with warm water to prevent sludge build up from clogging valve. Do not use abrasive cleaners when cleaning dispenser.
Soaps: All purpose low viscosity lotions and liquid synthetic detergents or oils, and vegetable based soaps should be used.
Tank: Shatter resistant, translucent polyethylene globe with screw-on cap.
Valve: (U001U) Theft resistant chrome on brass all purpose bellows type soap valve, with chrome on brass hex nut. Neoprene seals and a stainless return spring will provide a pre-measured, drip free dispensing system. Valve cannot be removed without taking hex nut off.
Wall Opening: 6 1/2"W x 6 1/2"H x 3 1/2"D 165mm x 165mm x 90mm
Width: 7.25"
